Monomer Reactivity Ratios for the Copolymerization of Styrene with Pure Meta-and Pure Para-Divinylbenzenes

Reactivity ratios for the copolymerization of styrene (r ₁) meta-divinylben-zene (r ₂–m) and with para-divinylbenzene (r ₂–p) have been redetermined under different reaction conditions and with different radioactivity assay techniques. The copolymers were prepared at two conversion levels [0.55 to 3.7% and 2.7 to 7.5% and at 80° (rather than 100°)] with benzoyl peroxide (in place of τ-butylhydroperoxide) initiator. The ionization chamber-vibrating reed electrometer radioactivity assay technique developed for other copolymerization studies was used in place of the direct counting technique previously used for the styrene/divinylbenzene systems. The new values are r ₁ = 0.605/r ₂-m = 0.88: r ₁ = 0.77/r ₂-p = 2.08 at 0.55 to 3.7% conversion and r ₁ = 1.27; r ₂–m = 1.08 at 2.7 to 7.5% conversion. These are not in close agreement with previous values partly because of the difference in conditions of copolymerization (temperature, per cent conversion, initiator) and in the improved analytical precision. Also the high-DVB-content (80%) para copolymer data are not assumed to be invalid and are not omitted (as they were before) from selection of the r ₂–p values.     

Neutralizing nearby singularities in numerical quadrature

A method of “neutralization” is presented that significantly weakens, if not eliminates, a singularity close to, but outside, the interval of integration. The effectiveness of the method is illustrated by a number of examples.     

Preferential Interactions on Polystyrene Divinylbenzene Copolymeric Sorbents

The adsorption of picric acid, naphthalene-sulfonic acid, and toluenesulfonic acid onto a polystyrene divinylbenzene copolymeric sorbent in methanol-water systems at 25°C was studied by reverse-phase high performance liquid chromatography. The observed peak asymmetry and increase in capacity factor at high methanol concentrations in the mixture was attributed to preferential interactions of the solutes at the surface. The phenomena were not as pronounced for octadecyl silane bonded phases.     

Preparation,Crystal Structure and Properties of Spirophosphoranes Derived from Hydroxycarboxylic Acid Azides

Abstract

Spirophosphoranes are produced by reaction of 2–phenyl–1,3,2–dioxaphospholane with both 2- and 3–hydroxycarboxylic acid azides, whereas 1–phenyl–phospholane yields spirophosphoranes only upon reaction with the former. The structures of two spirophosphoranes have been determined by X-ray analysis.     

ORGANISCHE PHOSPHORVERBINDUNGEN 80 HERSTELLUNG VON TRIAZOLYLMETHYL-PHOSPHONATEN UND VON TRIAZOLYL-METHYLPHOSPHONIUMSALZEN UND DEREN VERWENDUNG IN DER WITTIG-HORNER REAKTION

Abstract

Attempts to prepare 1H-1,2,4-triazol-1-ylmethylphosphonates (4 and 5) by a Mannichtype reaction or by transesterification of 1-hydroxymethyl-1H-1,2,4-triazol 1 with tertiary phosphites failed. On the other hand 4 and 5 are obtained by a Michaelis-Becker reaction from 1-chloromethyl-1H-1,2,4-triazol 3 and sodium phosphites in high yield. The Michaelis-Arbuzov reaction is less suited for the preparation of 4 and 5. 3 is obtained in good yield as a water clear liquid, b.p. 52–54°C/0.2 torr, from the interaction of 1 with thionyl chloride followed by treatment with a base. On standing at 0° or 20°C it decomposes within hours and yields the unsymmetrical methylen-bis(triazol) 3a in addition to other products. However an acetonitrile solution of 3 is stable for months. Heating this solution with tertiary phosphines gives triazolylsubstituted phosphoniumsalts 6 to 8. The Wittig-Horner reaction with 4 to 6 gives the olefinically substituted triazols 9–12 as a Z/E mixture in high yield. Alkylation of 4 with methyl-and ethyl iodide gives the corresponding alkylated diethyl-1H-1,2,4-triazol-1-yl-ethyl-1-and-propyl-1-phosphonates 14 and 15 which on hydrolysis with HCI yield 1H-1,2,4-triazol-1-yl-ethyl-1-and propyl-1-phosphonic acids 17 and 18, respectively. Hydrolysis of 4 gives the unsubstituted 1H-1,2,4-triazol-1-ylmethyl-phosphonic acid, 16.     

Quantification of retinoid concentrations in human serum and brain tumor tissues

Retinoic acid signaling is essential for central nervous system (CNS) differentiation and appears to be impaired in tumors. Thus far, there are no established methods to quantify relevant retinoids (all-trans-retinoic acid, 9-cis-retinoic acid, 13-cis retinoic acid, and retinol) in human brain tumors. We developed a single step extraction and quantification procedure for polar and apolar retinoids in normal tissue, lipid-rich brain tumor tissues, and serum. This quantification procedure is based on high performance liquid chromatography (HPLC) with diode-array detection (DAD) using all-trans-acitretin as an internal standard and extraction by liquid–liquid partition with ethyl acetate and borate buffer at pH 9. Recovery with this extraction procedure was higher than earlier (two-step) liquid–liquid extraction procedures based on hexane, NaOH, and HCl. The overall quantification procedure was validated according to Food and Drug Administration (FDA) guidelines and fulfilled all criteria of accuracy, precision, selectivity, recovery, and stability. The overall method accuracy varied between −5.6% and +5.4% for serum and −3.8% and +6.2% for tissues, and overall precision ranged from 3.1% to 6.9% for serum and 2.1% to 8.3% for tissues (%CV batch-to-batch). The lower limit of quantification for all compounds in tumor tissue (and serum) was 3.9 ng g⁻¹ (ng mL⁻¹). Using this assay, photodegradation of the retinoids was evaluated and endogenous polar and apolar retinoids were quantified in sera and brain tumor tissues of patients and compared with serum and tonsil tissue concentrations of controls. It may thus serve as a suitable method for the characterization of retinoid uptake and metabolism in the respective compartments.